SnapNrack introduces solar mount that attaches to module before roof – pv magazine International

From pv journal USA

SnapNrack has introduced the TopSpeed, an progressive new photo voltaic panel mount designed to be connected to the panel on the bottom, earlier than being lifted to the roof for set up.

The solar racking provider mentioned tThe brand new product is geared toward decreasing set up occasions and limiting the time spent on roofs. SnapNrack claims that the period of time spent on roofs may be lower by greater than 50%, in comparison with conventional racking options. It is a security profit for the set up employees.

The mounts are connected to the roof, leveled and fitted to the SnapNrack’s common skirt. The method helps simplify supplies staging and racking meeting.

The set up course of includes three steps. First, TopSpeed ​​​​​​mounts are connected to the photo voltaic modules. Subsequent, wire administration is completed, with Good Clips and module stage energy electronics (MLPE) body kits put in place. These first two steps are accomplished on the bottom, whereas the common skirt is positioned on the roof. Lastly, the modules are simply connected to the skirt.

The product is UL licensed and rated to carry out underneath 90 mph to 180 mph wind hundreds and as much as 90 kilos per sq. foot of snow load. All mounts are secured with a proprietary half-inch head wooden screw and roof sealant. The design permits for the set up of a tool. The mounting system contains new options equivalent to retained fasteners and deck mounts.

The product is manufactured from aluminum alloy and 300 sequence stainless-steel. It’s completed on high with a black oxide bolt and bonding clip and a black anodized clamp, whereas the underside has a mill end. It’s accredited for installations between zero-degree and 90-degree roof pitches.

The product will probably be on show at Intersolar North America 2023 in Lengthy Seaside, California, on the SnapNrack sales space from February 14 to February 16.