Kensol stated the brand new water-source warmth pump makes use of a Panasonic Inverter DC twin rotary compressor and is able to reaching a most water temperature of 60 C.
Polish heating specialist Kensol has launched a monobloc water-source warmth pump for residential purposes.
“The KTM monobloc warmth pump depends on a Panasonic DC Twin Rotary compressor, which ensures a easy working course of in a temperature vary as much as -30 C,” a spokesperson from the corporate stated. pv journal, because the machine additionally makes use of R32 as refrigerant. “The unit ensures easy operation at exterior temperatures as little as -30 C and, due to the improved steam injection expertise used, the pump can attain movement temperatures as excessive as 65 C.”
The corporate provides the brand new product in 5 variations with a capability of 6 kW, 10 kW, 14 kW, and 17 kW respectively. For the heating mode, the coefficient of efficiency (COP) is as much as 4.90 for the biggest mannequin and as much as 4.91 for the smallest mannequin, in response to the corporate’s datasheet.
The warmth pump may also obtain a most water temperature of 60 C and its working vary between -30 C and 43 C.
The 6 kW machine has dimensions of 970 mm x 475 mm x 835 mm and weighs 120 kg. The 17 kW system has dimensions of 1,050 mm x 480 mm x 1330 mm and weighs 190 kg.
“The controller with an built-in WiFi module permits for the clever operation of three heating circuits as customary,” the spokesperson continued to say. “Further equipment improve the variety of supported circuits and allow set up with room thermostats.”
The producer provides a 5-year product guarantee for the warmth pump.
Kensol relies in Gliwice, Higher Silesia, in southern Poland, the place it operates a photo voltaic module and warmth pump manufacturing facility.
This content material is protected by copyright and is probably not reused. If you wish to cooperate with us and wish to reuse a few of our content material, please contact: editors@pv-magazine.com.
